How to Handle a Bird Strike at Denver Area Airports
Bird activity is a routine aviation hazard around Denver, but routine does not mean harmless. Centennial Airport (KAPA) and Rocky Mountain Metro Airport (KBJC) sit in a fast-growing corridor where open land, reservoirs, drainage channels and urban development attract different species throughout the year. A bird strike can damage a windscreen, dent a leading edge, affect flight controls or disable an engine within seconds.
For pilots travelling from Australia, the basic priorities are familiar: fly the aircraft, maintain control and communicate clearly. The local details differ, however. Denver’s high elevation, rapidly changing weather, busy training traffic and nearby mountain terrain can make a seemingly minor wildlife encounter more demanding. Preparation, disciplined decision-making and a sound knowledge of the aircraft’s limitations are essential.
Why bird activity matters around Denver
Birds are drawn to the grass, water and undeveloped spaces surrounding metropolitan airports. Raptors may patrol open areas near the runway, while gulls, geese, ducks and smaller flocking birds move between ponds, reservoirs and feeding grounds. At Centennial, traffic density and flight-school activity can put several aircraft into the circuit during periods when wildlife is also active. Rocky Mountain Metro has its own mix of open terrain and nearby development, so the risk profile can change between airports.
Seasonal patterns matter. Spring and autumn migration can increase the number of birds crossing approach and departure paths. Early morning and late afternoon often bring more movement, although there is no universally safe time of day. Snow, drought, irrigation and construction can alter feeding and roosting behaviour. A wildlife warning from the tower or a recent strike report should be treated as useful operational information, not background chatter.
The species encountered in Colorado also differ from those familiar to an Australian pilot. Someone used to galahs near Moorabbin, corellas around Bankstown or plovers at Archerfield should still expect the same broad principle: flocking birds and larger individual birds deserve respect, and a visual sighting can represent only part of the hazard.
Before departure: build wildlife into the plan
A thorough pre-flight begins with the airport’s current conditions. Check the ATIS, NOTAMs and any tower advisories for bird activity, runway closures or wildlife control work. Look at the wind and likely departure runway, then consider where an encounter would be most consequential. A bird strike immediately after rotation leaves little time to diagnose damage or return, particularly from a high-density-altitude airport.
At Centennial and Rocky Mountain Metro, review the aircraft’s performance at the actual temperature, pressure altitude, weight and runway condition. Denver’s elevation reduces engine and propeller performance compared with sea-level operations. That does not make a strike more likely, but it can reduce climb margins after an engine problem. Know the take-off distance, expected climb rate and usable landing options before lining up.
Brief the first actions aloud. Decide who will fly, who will handle the radio and what indications would trigger a return, a circuit, a landing on another runway or an immediate forced landing. In a training aircraft, the instructor should make the plan explicit rather than assuming the student will recognise the urgency. Owners and renters should also know where the emergency checklists are and whether the aircraft has particular windshield, propeller or engine limitations.
A short-runway briefing is useful when a wildlife encounter happens during the ground roll or just after liftoff. Techniques covered in short runway guidance can help pilots think clearly about acceleration, decision points and stopping distance, even when the runway at issue is not especially short.
What to do during the strike
The first priority is aircraft control. Maintain the appropriate attitude and airspeed, keep the aircraft tracking the runway or departure path, and resist the urge to look over a wing or inspect the windscreen immediately. A bird strike can produce a loud bang and a sudden distraction, but the sound itself does not tell you whether the aircraft remains controllable.
After stabilising the flight path, identify the effects. Check engine indications, power, oil pressure, temperature, propeller behaviour, flight controls, electrical systems and windscreen condition. If the engine is still producing power, avoid abrupt power changes unless the aircraft flight manual or emergency checklist directs them. If the windscreen is cracked or obscured, use the available side window, instruments and outside references while maintaining a safe speed.
A strike does not always cause an obvious loss of performance. A damaged propeller can create vibration, a dented leading edge can conceal structural damage, and a bird lodged in an engine intake may cause problems later. Treat unusual vibration, control stiffness, smoke, fluid loss or a burning smell as significant. The decision to continue should be based on aircraft condition, runway position, weather and available landing areas, rather than embarrassment or schedule pressure.
If the bird passes close but no contact is confirmed, continue monitoring. Multiple birds may follow the first, and the initial sighting may have been a flock. Keep the aircraft clear of the area when practical and advise ATC so other departures and arrivals can be warned.
Communicating with air traffic control
Use plain, concise radio calls. A pilot who has struck a bird can state the aircraft identification, position, nature of the problem and intention: “Centennial Tower, Cherokee 123AB, bird strike after departure, engine indications normal, remaining in the pattern for inspection.” If there is uncertainty about the aircraft’s condition, say so. “Unable to determine damage” is more useful than a vague call that gives controllers no basis for assistance.
Declare an emergency when the situation warrants priority, immediate landing or additional support. A bird strike with power loss, major windscreen damage, suspected control impairment, fire, severe vibration or uncertain aircraft controllability should be treated seriously. ATC can protect the runway, coordinate emergency vehicles, provide traffic information and offer vectors. Controllers cannot inspect the aircraft, so the pilot retains responsibility for selecting the safest outcome.
If returning to Centennial or Rocky Mountain Metro is unsuitable, a diversion may be the safer choice. Consider runway length, wind, terrain, airport services and the aircraft’s remaining performance. The operational thinking in this guide to managing a diversion applies after a wildlife encounter as well: make the decision early, brief the route and avoid letting familiarity with the departure airport override the aircraft’s condition.
Australian pilots will recognise the value of standard phraseology from operations around Sydney, Melbourne or Brisbane, but the airspace workload can feel different in the Denver area. Keep the call short, listen for the clearance and read back the essentials. “Stand by” from ATC is not a reason to delay an urgent declaration or a landing decision.
Deciding whether to land or continue
A confirmed strike should prompt a deliberate assessment, even when the engine appears normal. If the aircraft is still on the runway and there is enough stopping distance, a rejected take-off may be appropriate. If airborne, the safest action may be a circuit and landing, provided the aircraft is controllable and the runway is available. A go-around after a strike can add risk if power or control response is uncertain.
The choice depends on what has been damaged. A small mark on a wing may be cosmetic, while a bird through the windscreen, a damaged propeller or a reported engine surge requires a more conservative response. Consider the possibility of hidden damage and the fact that high-elevation performance can deteriorate quickly with a heavy aircraft, warm air or a tailwind.
If the aircraft is controllable but the primary runway is occupied, ask ATC for the most suitable available runway. If the windscreen is blocked, an instructor or qualified passenger can help with outside lookout, but the pilot flying must retain control. Use instruments when visual references are unreliable and avoid steep turns or unnecessary manoeuvring close to the ground.
Mountain flying adds another layer. A departure from the Denver area may place the aircraft near rising terrain, passes or weather systems before a pilot has time to diagnose a problem. A strike on a route toward the Front Range should make the terrain escape plan especially clear. Turning back, landing ahead or diverting to a lower-risk airport may be preferable to pressing towards terrain with uncertain performance.
After landing and aircraft inspection
Once safely on the ground, stop in a suitable location and shut down according to the aircraft checklist. Do not approach a damaged propeller or engine while it is turning, and do not restart an engine simply to taxi without proper assessment. Tell ground control and airport operations that a bird strike has occurred so the runway and surrounding area can be checked for debris or further wildlife activity.
Record what happened while details are fresh. Note the time, runway, altitude, phase of flight, approximate bird size and number, direction of travel, weather, aircraft indications and any visible damage. Photographs can help maintenance personnel, but the inspection should be performed by an appropriately qualified engineer or maintenance organisation. Damage may be hidden behind fairings, inside an engine inlet or along a control surface.
The aircraft should not return to service merely because it flies normally after the event. Maintenance personnel may need to inspect the windscreen, propeller, spinner, engine inlet, flight controls, leading edges, lights and antennas. For a Cirrus aircraft, follow the relevant aircraft documentation and contact an approved service facility or the operator’s maintenance support. A clean logbook record and clear handover prevent a later pilot from unknowingly accepting a compromised aircraft.
Reporting supports airport wildlife management. In the United States, the event should be recorded through the applicable operator, airport and FAA processes, including the FAA wildlife strike reporting system where appropriate. Australian operators should follow their organisation’s procedures and relevant CASA and ATSB reporting requirements when operating under Australian oversight. The purpose is to improve hazard information, not to assign blame.
Training for students and experienced pilots
Bird-strike preparation belongs in recurrent training, aircraft checkouts and mentoring sessions. Students can practise the radio call, engine-failure priorities and return-to-airport decision in a simulator or structured briefing. Experienced pilots benefit from rehearsing the same actions in a faster, busier environment where a loud impact can trigger startle and fixation.
A useful lesson separates recognition from response. First, maintain control. Second, assess power and aircraft behaviour. Third, communicate and choose the safest landing option. Fourth, secure the aircraft and report the event. This sequence is simple enough to remember under pressure and flexible enough for a range of aircraft, from a two-seat trainer to a turbine-powered Cirrus.
Training material should be clear, visual and accessible to the whole operation. A well-designed Moodle tutorial illustrates how step-by-step learning resources can be organised, even though the subject matter is different. Flight schools can apply the same principle to emergency checklists, radio examples, aircraft-specific limitations and post-flight reporting.
For Australian pilots transitioning to US operations, local differences deserve explicit attention. The phrase “mayday” has the same urgency, but airport layouts, runway numbering, tower procedures and reporting channels may be unfamiliar. A pilot used to coastal haze at Jandakot or strong crosswinds at Hobart should still study Denver’s density altitude, convective weather and terrain before flying solo. Familiar stick-and-rudder skills do not replace local operational knowledge.
Reducing future risk
Pilots cannot remove wildlife from an airport, but they can reduce exposure. Avoid low-level sightseeing over known bird concentrations, respect airport advisories and remain alert during climb and approach. When permitted, keep a good outside scan during the initial climb rather than focusing exclusively on instruments. At night, use the aircraft lighting and maintain disciplined instrument cross-checking, while recognising that birds may be difficult or impossible to see.
Airport wildlife teams use habitat management, dispersal techniques, grass and water control, fencing and runway inspections. Pilot reports help them identify recurring locations and times. A brief, accurate report about geese near a taxiway or a flock crossing the departure end can protect the next aircraft, whether it is a local trainer, a business aircraft or an international visitor building US experience.
The same habits transfer to Australian flying. Galahs near regional strips, gulls around coastal airports, ibis near urban wetlands and plovers on grassed areas can create comparable hazards. At a busy field such as Bankstown or Moorabbin, a prompt report may be especially valuable because repeated circuit traffic exposes many aircraft to the same wildlife movement.
A bird strike is an event to manage methodically, not a spectacle to dismiss or a reason to panic. Good preparation, immediate aircraft control, clear communication, conservative performance decisions and proper maintenance turn a sudden impact into a structured emergency response. Around Denver’s airports, that discipline protects the pilot, passengers, aircraft and everyone sharing the runway environment.